Skip to content
U UtilHQ

Concrete Calculator

Calculate exactly how much concrete you need for slabs, footings, walls, and columns. Our calculator converts your dimensions to cubic yards and shows how many bags to buy.

100% Free
No Data Stored
Instant Results
ft
ft
in
Volume Needed
1,23
cubic yards
Estimated Cost
$154
at $125/yard

Bags Needed by Size

60lb Bags75
80lb Bags56

Pro Tip: Always order 10% extra concrete to account for spillage, uneven ground, and waste. For this project, consider ordering 1.36 cubic yards.

Ad Space

The Concrete Volume Formula

Concrete volume is calculated using a simple formula:

Volume = Length × Width × Depth

The tricky part is unit conversion. Most measurements are in feet and inches, but concrete is sold by the cubic yard. Here's the math:

  1. Convert depth from inches to feet (divide by 12)
  2. Multiply Length × Width × Depth to get cubic feet
  3. Divide by 27 to convert to cubic yards

For example: A 10ft × 10ft patio at 4 inches deep = 10 × 10 × 0.333 = 33.3 cubic feet = 1.23 cubic yards.

Bags vs. Ready-Mix: Which Should You Choose?

The break-even point is around 1 cubic yard:

  • Under 1 yard: Buy bags (60lb or 80lb). More control, no delivery fees, work at your own pace.
  • Over 1 yard: Order ready-mix delivery. Faster pour, better consistency, less physical labor.

A 60lb bag yields about 0.45 cubic feet. An 80lb bag yields about 0.6 cubic feet. For most DIY projects, 80lb bags are more cost-effective despite the extra weight.

Why You Need 10% Extra

Never order exactly what the calculator shows. Here's why concrete gets "lost":

  • Uneven subgrade: Ground is never perfectly flat—low spots eat concrete
  • Form bulging: Wood forms bow slightly under pressure
  • Spillage: Some concrete inevitably misses the forms
  • Over-excavation: Digging slightly too deep is common

Running short mid-pour creates a "cold joint"—a weak seam that cracks. The 10% buffer costs a few dollars but prevents expensive failures.

Frequently Asked Questions

How much does a cubic yard of concrete weigh?
A cubic yard of concrete weighs approximately 4,000 pounds (2 tons). This is why delivery trucks are necessary for large pours—even 2 cubic yards weighs as much as a car.
How long does concrete take to cure?
Concrete reaches 70% strength in 7 days and full strength in 28 days. You can walk on it after 24-48 hours and drive on it after 7 days, but avoid heavy loads for the full 28-day cure period.
What PSI concrete do I need?
For most residential projects: 2,500 PSI for footings, 3,000 PSI for driveways and sidewalks, 3,500-4,000 PSI for garage floors and high-traffic areas. Standard bagged concrete is typically 4,000 PSI.
Can I pour concrete in cold weather?
Avoid pouring below 40°F (4°C). Concrete that freezes before curing loses up to 50% of its strength. If you must pour in cold weather, use hot water in the mix and cover with insulated blankets.
🔧

Estimate Disclaimer

All calculations are estimates only. Actual material requirements may vary based on job site conditions, waste factors, and installation methods. Always verify quantities with a qualified contractor before purchasing materials. We are not responsible for over or under-ordering based on these estimates.